Herr Dr.

Thomas Günther

Stellvertretender Institutsleiter
Institut für Mikrointegration

Kontakt

+49 711 685-83713
+49 711 685-83705

Allmandring 9b
70569 Stuttgart
Deutschland

  1. Kulkarni, R., Wappler, P., Soltani, M., Haybat, M., Guenther, T., Grözinger, T., & Zimmermann, A. (2019). An Assessment of Thermoset Injection Molding for Thin-Walled Conformal Encapsulation of Board-Level Electronic Packages. Journal of Manufacturing and Materials Processing, 3, 18. https://doi.org/10.3390/jmmp3010018
  2. Röder, M., Schilling, P., Hera, D., Günther, T., & Zimmermann, A. (2018). Influences on the Fabrication of Diffractive Optical Elements by Injection Compression Molding. Journal of Manufacturing and Materials Processing, 2(1), 5. https://doi.org/10.3390/jmmp2010005
  3. Röder, M., Meißner, T., Günther, T., & Zimmermann, A. (2018). Micro-lens array fabrication by means of ultra-precision milling and injection compression molding. Polymer Replication on Nanoscale, Technical University of Denmark, Copenhagen.
  4. Röder, M., Drexler, M., Guenther, T., & Zimmermann, A. (2018). Evaluation of ultra-precision milling strategies for micro lens array mould inserts for the replication by injection-compression moulding. EUSPEN 18th International Conference & Exhibition, Venice.
  5. Röder, M., Drexler, M., Rothermel, T., Meißner, T., Günther, T., & Zimmermann, A. (2018). Injection Compression Molded Microlens Arrays for Hyperspectral Imaging. Micromachines, 9(7), 355. https://doi.org/10.3390/mi9070355
  6. Röder, M., Schilling, P., Fritz, K.-P., Günther, T., & Zimmermann, A. (2018). Challenges in the fabrication of microstructured polymer optics. World Congress on Micro and Nano Manufacturing, Portozoz.
  7. Wolf, M., Janek, F., Meißner, T., Wigger, B., Barth, M., Günther, T., Eberhardt, W., Geneiß, V., Lübke, T., Hedayat, C., Otto, T. W., & Zimmermann, A. (2018). Investigation on the Influence of Injection Molding Parameters on High Frequency Permittivity up to 3 GHz on MID Thermoplastics and Reliability of Permittivity During Environmental Testing. International Congress Molded Interconnect Devices, Würzburg.
  8. Wolf, M., Janek, F., Meißner, T., Wigger, B., Barth, M., Günther, T., Eberhardt, W., Geneiß, V., Lueke, T., Hedayat, C., & Otto, T. W. (2018). Investigation of Process Parameters on Permittivity for High-Frequency and Mixed-Signal Systems based on LDS Technology.
  9. Müller, H., Weser, S., Liu, Y., Vieten, T., Günther, T., Eberhardt, W., & Zimmermann, A. (2017). Additive Fertigung von Spritzgusswerkzeugeinsätzen für MID.
  10. Kulkarni, R. A., Hera, D., Soltani, M., Günther, T., Grözinger, T., & Zimmermann, A. (2017). Feasibility of manufacturing packaged electronic systems by thermoset injection molding. Smart Systems Integration.
  11. Hera, D., Günther, T., & Zimmermann, A. (2017). Duroplaste – Hightech für die mikroelektronischen Packages von morgen. 25. Stuttgarter Kunststoffkolloquium, Stuttgart.
  12. Zimmermann, A., Grözinger, T., Röder, M., Günther, T., Seybold, J., Bülau, A., Fritz, K.-P., Müller, H., & Eberhardt, W. (2017). Micro Manufacturing of Microfluidic, Optical and Mechatronic Devices. World Congress on Micro and Nano Manufacturing, Kaohsiung, Taiwan.
  13. Röder, M., hera, D., Schilling, P., Thiele, S., Pruss, C., Osten, W., Zimmermann, A., & Günther, T. (2017). 3D laser direct-writing based mold fabrication for the manufacturing of diffractive-refractive elements. Polymer Replication on Nanoscale, Aachen.
  14. Hera, D., Berndt, A., Guenther, T., Schmiel, S., Harendt, C., & Zimmermann, A. (2017). Flexible Packaging by Film-Assisted Molding for Microintegration of    Inertia Sensors. SENSORS, 17(7), Article 7. https://doi.org/10.3390/s17071511
  15. Röder, M., Hera, D., Thiele, S., Pruss, C., günther, T., Osten, W., & Zimmermann, A. (2016). 3D laser direct-writing based master fabrication for injection compression molding of diffractive-refractive elements. European Optical Society Annual Meeting, Berlin.
  16. Müller, H., Weser, S., Liu, Y., vieten, T., Günther, T., Eberhardt, W., & Zimmermann, A. (2016). Generative Processes for Rapid Prototyping of MID: Methods and Potentials. Proceedings of 12th International Congress Molded Interconnect Devices.
  17. Müller, H., Weser, S., Liu, Y., Günther, T., Eberhardt, W., & Zimmermann, A. (2015). Rapid-Prototyping von MID mittels generativer Verfahren.
  18. Beichter, S., Weser, S., Müller, H., Petillon, S., Haug, B., Günther, T., Eberhardt, W., & Zimmermann, A. (2015). Functionalized Sensor Packaging Based on Thermoset Injection Molding and Selective Metallization Technology. 20th European Microelectronics and Packaging Conference & Exhibition, Friedrichshafen, Germany.
  19. Hera, D., Schulze Spüntrup, J. D., Günther, T., Harendt, C., Berndt, A., Reuter, C., Fritz, K.-P., Kück, H., & Zimmermann, A. (2015). Flexible packaging by film assisted molding for microintegration of MEMS based sensors. European Microelectronics and Packaging Conference & Exhibition, Fridrichshafen, Germany.
  20. Hera, D., Günther, T., Berndt, A., Harendt, C., Schulze Spüntrup, J. D., Reuter, C., Fritz, K.-P., Kück, H., & Zimmermann, A. (2015). Flexible packaging by film assisted molding for micro assembly technologies based on PCB. International Conference and Exhibition on Integration Issues of Miniaturized Smart Systems.
  21. Matic, V., Liedtke, L., Guenther, T., Buelau, A., Ilchmann, A., Keck, J., Polzinger, B., Eberhardt, W., & Kueck, H. (2014). Inkjet printed differential mode touch and humidity sensors on injection molded polymer packages. SENSORS, 2014 IEEE, 2234–2237. https://doi.org/10.1109/ICSENS.2014.6985485
  22. Polzinger, B., Matic, V., Liedtke, L., Keck, J., Hera, D., Günther, T., Eberhardt, W., & Kück, H. (2014). Printing of Functional Structures on Molded 3D Devices. 11th International Congress Molded Interconnect Devices – Scientific Proceedings, 1038, 37--42. https://doi.org/10.4028/www.scientific.net/AMR.1038.37
  23. Guenther, Thomas, Kong, C. (Charlie), Lu, H., Svehla, M., Lovell, N., Ruys, A., & Suaning, G. J. (2014). Pt-Al2O3 interfaces in cofired ceramics for use in miniaturized neuroprosthetic implants. Journal of Biomedical Materials Research Part B Applied Biomaterials, 102(3), 500–507. https://doi.org/10.1002/jbm.b.33027
  24. Green, R. A., Guenther, T., Jeschke, C., Jaillon, A., Yu, J. F., Dueck, W. F., Lim, W. W., Henderson, W. C., Vanhoestenberghe, A., Lovell, N. H., & Suaning, G. J. (2013). Integrated electrode and high density feedthrough system for chip-scale implantable devices. Biomaterials, 34(26), 6109--6118. https://doi.org/10.1016/j.biomaterials.2013.04.054
  25. Patel, S., Guenther, T., Dodds, C. W. D., Kolke, S., Privat, K. L., Matteucci, P. B., & Suaning, G. J. (2013). Materials design considerations involved in the fabrication of implantable bionics by metallization of ceramic substrates. 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 759–762. https://doi.org/10.1109/EMBC.2013.6609611
  26. Guenther, Thomas, Lovell, N., & Suaning, G. J. (2012). Bionic vision: System architectures - A review. Expert Review of Medical Devices, 9(1), 33–48.
  27. Guenther, T., Dodds, C. W. D., Lovell, N. H., & Suaning, G. J. (2011). Chip-scale hermetic feedthroughs for implantable bionics. 2011 Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 6717–6720. https://doi.org/10.1109/IEMBS.2011.6091656
  28. Guenther, T., Mintri, A., Lim, W. W., Jung, L. H., Lehmann, T., Lovell, N. H., & Suaning, G. J. (2011). Laser-micromachined, chip-scaled ceramic carriers for implantable neurostimulators. 2011 Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 1085–1088. https://doi.org/10.1109/IEMBS.2011.6090253
  29. Dodds, C. W. D., Schuettler, M., Guenther, T., Lovell, N. H., & Suaning, G. J. (2011). Advancements in electrode design and laser techniques for fabricating micro-electrode arrays as part of a retinal prosthesis. 2011 Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 636–639. https://doi.org/10.1109/IEMBS.2011.6090141
  30. Günther, T., Schüttler, M., Ordonez, J. S., Henle, C., Wilde, J., & Stieglitz, T. (2009). A Novel Interconnection Technology for Laser-Structured Platinum Silicone Electrode Arrays. 4th European Conference of the International Federation for Medical and Biological Engineering. https://doi.org/10.1007/978-3-540-89208-3_574
  31. Schuettler, M., Henle, C., Ordonez, J. S., Meier, W., Guenther, T., & Stieglitz, T. (2008). Interconnection technologies for laser-patterned electrode arrays. 2008 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 3212–3215. https://doi.org/10.1109/IEMBS.2008.4649887
Zum Seitenanfang